National Instruments cFP-2000 Compact FieldPoint Controller Interface

Description

National Instruments cFP-2000 Compact FieldPoint Controller Interface
Comes with what you see in the pictures. If you don't see it, you probably won't get it.
Specifications are from National Instruments and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
This unit is guarnateed to work.
The Unit's Serial Number Tag Reads:
Model Number:
cFP-2000
Part Number:
188539C-01 (other units may have different part numbers)
Serial Number:
D6B1E6
Features:
Stand-alone embedded real-time controller or Ethernet interface for PC-based distributed I/O
Embedded controller runs LabVIEW Real-Time for control, data logging, and signal processing
1 RS232 serial port for connection to peripherals
32 MB of nonvolatile CompactFlash storage, 16 MB DRAM memory
Support for LabVIEW Real-Time Module 8.5.1 and earlier
Support for Windows Vista and earlier
Description:
Using the NI LabVIEW Real-Time Module, you can develop powerful data logging, control, and measurement systems on your PC and easily embed your application on the NI cFP-2000 intelligent controller for reliable distributed or stand-alone deployment. You can embed all the intelligence, advanced control, and analysis capabilities of LabVIEW in a small modular package suitable for industrial environments. Engineers and scientists typically use NI cFP-20xx controllers in applications requiring industrial-grade reliability - such as analog process and discrete control systems--to run proportional integral derivative (PID) control loops, actuate valves and motors, take measurements, perform real-time analysis and simulation, log data, and communicate over serial, phone, and Ethernet. Once deployed, the controller can communicate peer to peer with other cFP-20xx or FP-20xx intelligent FieldPoint controllers, or with unintelligent network interfaces such as the NI FP-16xx and FP-1000. In addition, the cFP-2000 interface automatically publishes I/O measurements to a Windows computer running FieldPoint Explorer, LabVIEW, the LabVIEW Datalogging and Supervisory Control (DSC) Module, LabWindows/CVI, Lookout, or your choice of OLE for process control (OPC) client application software. It also easily integrates with existing legacy or programmable logic controller (PLC) systems.
Specifications:
Network:
Network Interface:
10BaseT and 100BaseTX Ethernet
Compatibility:
IEEE 802.3
Communication Rates:
10 Mb/s, 100 Mb/s, autonegotiated
Maximum Cabling Distance:
100 m/segment
Maximum Power to Connected I/O Modules:
9 W
Maximum Number of Banks:
Determined by network topology
Memory:
32 MB nonvalitile; 16 MB DRAM
Serial Ports:
One RS-232, DTE
Power Requirement:
Power Supply Range:
11 to 30 VDC
Recommended Power Supply:
PS-5
cFP-BP-4 System:
15 W
cFP-BP-8 System:
20 W
Power Consumption:
4.8 W + 1.1 (I/O module power requirements)
Physical Characteristics:
LED Indicators:
POWER (green):
Valid power to module
STATUS (red):
Failure condition
LINK/ACTIVE (green):
Valid network connection when lit; Ethernet activity when blinking
100 Mbps (yellow):
Ethernet speed (10 Mb/s if unlit)
User-defined:
3 bicolor, 1 green
DIP Switches:
3 user-defined, 3 predefined
Screw-Terminal Wiring:
16-26 AWG copper conductor wire with 7 mm (0.28") of insulation stripped from the end
Torque for Screw-terminals:
0.5 - 0.6 N m (4.4 - 5.3 lb in.)
Weight:
286 g (10.1 oz)
Dimensions, cFP-20xx on cFP-BP-4 Backplane:
127 mm x 246 mm x 106 mm (5.0" x 9.7" x 4.2")
Dimensions, cFP-20xx on cFP-BP-8 Backplane:
127 mm x 441 mm x 106 mm (5.0" x 17.4" x 4.2")
Environmental:
FieldPoint modules are intended for indoor use only. For outdoor use, they must be installed in a suitable sealed enclosure.
Operating Temperature:
-25 to 60°C
Storage Temperature:
-55 to 85°C
Relative Humidity:
10 to 90%, noncondensing
Maximum Altitude:
2,000 m; at higher altitudes the isolation voltage ratings must be lowered
Pollution Degree:
2
Shock and Vibration:
Operating Vibration:
Random (IEC 60068-2-64):
10 to 500 Hz, 5 g
rms
Sinusoidal (IEC 60068-2-6):
10 to 500 Hz, 5 g
Operating Shock (IEC 60068-2-27):
50 g, 3 ms half sine, 18 shocks at 6 orientations; 30 g, 11 ms half sine, 18 shocks at 6 orientations.
Safety:
This product is designed to meet the requirements of the followin standards of safety for electrical equipment or measurement, control, and laboratory use: IEC 61010-1, EN 61010-1, UL 3121-1, UL 61010C-1, CAN/CSA C22.2 No. 1010.1.
Electromagnetic Compatbility:
CE, C-Tick, and FCC Party 15 (Class A) Compliant
Emissions:
EN 55011 Class A at 10 m FCC Part 15A above 1 GHz
Low-Voltage Directive (Safety):
73/23/EEC
Electromagnetic Compatibility Directive (EMC):
89/336/EEC
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a .00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
12/10/18